Automobile Garage Equipments

Approx. Rs 30,000 / PieceGet Latest Price

Our proficiency in this arena enables us to provide to our consumers on a large scale, Oil Dispenser.

Features:

• Longer service life

• Robust design

• Smooth operation

• Ruggedness

• Sturdy construction

• Reliable nature

• Suction Drainers

• Our company has gained name and fame in providing Suction Drainers to the clients. These Suction Drainers are available in various specifications and made by using superior grade of aluminum. The offered Suction Drainers are manufactured as per the specific requirements of the clients and is widely demanded by the clients.

• Features:
  
  
  • Easy maintenance
  • Abrasion resistant
  • High tensile strength

   

Approx. Rs 25,000 / PieceGet Latest Price

• Compressed air input range 10-12bar / 145-175psi
• Nitrogen output 66lpm @ 10bar / 145psi
• N2 output pressure 7bar / 100psi
• Nitrogen storage tank 70liter
• Motor power 60w
• Motor voltage 220v, 1ph
• Display mode LED
• Weight 145kg
• Packing size 760x615x1560mm

Additional Information:

• Minimum Order Quantity: 1 Piece

Approx. Rs 3.25 Lakh / PieceGet Latest Price

• Superior functionality
• Long service life
• Less maintenance

Additional Information:

• Minimum Order Quantity: 1 Piece

Approx. Rs 90,000 / UnitGet Latest Price

• Lifting capacity: 4000kg
• Lifting height: 1800mm
• Minimum height: 110mm
• Lifting time: 40-45s/50s
• Overall height: 2830mm
• Overall width: 3420mm
• Width between column: 2820mm
• Motor power: 2.2kW
• Power supply: 220V/240V/380V/415V
• Package: 2900x530x770mm

Approx. Rs 1.15 Lakh / UnitGet Latest Price

• Die attachment for 4', 4.5", 5', 5.5', 6 ' rim width
• Power requirement: 220V AC single phase / three phase
• Motor: 2hp, 1440 RPM
• Gross weight of machine: 250 kg

Approx. Rs 1.2 Lakh / UnitGet Latest Price

• Automatic release from one side
• Base plate design suitable for lowering celling work shop.
• Dual hydraulic "Driect - Drive" cylinder
• Heavy duty carriage for superior strength and durability
• Drop-end arms provide a lower pad height.
• Electric/hydraulic power system.
• Heavy-duty equalizer cables with over size cable sheaves.

• Lifting capacity 3.5T
• Lock release type Manual release
• Lift Height 1800mm
• Lifting time 50 sec
• Height of post 2725mm
• Motor power 2.2 kw
• Power supply 380 volts/220 volts

Additional Information:

• Minimum Order Quantity: 1 Unit

Approx. Rs 80,000 / UnitGet Latest Price

Tyre Changer

Additional Information:

• Minimum Order Quantity: 1 Unit

Approx. Rs 55,000 / UnitGet Latest Price

Additional Information:

• Minimum Order Quantity: 1 Unit

Approx. Rs 3.75 Lakh / UnitGet Latest Price

• Colour LCD with high pressure resolution graphics

• Measuring Range with Accuracy
• Wheel Size Range 10" - 20"
• Total Toe ±20° with ±2'
• Individual Toe ±20° with ±1'
• Camber ±10° with ±5'
• Castor ±18° with ±5'
• Kingpin Inclination ±18° with ±5'
• Wheel Setback ±5° with ±2'
• Load Capacity of Turntables 600 Kgs
• Power Supply 220V, 1 phase

Additional Information:

• Minimum Order Quantity: 1 Unit

Approx. Rs 95,000 / UnitGet Latest Price

• 19" Colour display, Easy setting
• Digital data setting using "+" "-" keys
• Brief cycle time of 6 secs
• Single spin low RPM balancing technology
• Automatic positioning for weight installation
• Un-balance Optimization: Weight Optimization (reduction)
• Self calibration using master weight
• Self Diagnostic Un-balance optimisation
• Alloy / Mag wheel balancing
• Pedal brake
• Proven design

Additional Information:

• Minimum Order Quantity: 1 Unit

Approx. Rs 1.5 Lakh / PieceGet Latest Price

Approx. Rs 1.2 Lakh / UnitGet Latest Price

Technical features  

• Closed chain drive for power transmission
• Electrical limit switches for stopping at maximum/minimum heights
• Extra safety nuts
• Automatic arms locking and releasing device wile lifting and lowering
• Extender adapter or SUVs
• Chemical injection anchoring bolts (optional)

Technical Specifications:-

Additional Information:

• Minimum Order Quantity: 1 Unit

Approx. Rs 80,000 / UnitGet Latest Price

• New Automatic Tyre Changer, the tilt backward and forward of the column and the lock of the column can be completed pneumatically
• Self-centering four jaw chuck and powerful bead breaker
• The machine adopts the parkerising bead breaker cylinder with Ø 200 diameter having bead breaking power 2800Kg to bead break the tyre from rim easily
• The control pedal assembly has the step-move function which can stop the clamp at any position to clamp the rim conveniently
• The machine equips the protective cover for clamps and mounting head as standard configuration to avoid damaging the rim
• The clamp is made of special material, strong and durable
• Turntable with outside adjustable jaws, which enlarge machine’s mounting and dismounting range
• The design of the bead breaker blade can rotate at any direction , securing the best bead breaking force. The bead breaker blade is equipped with the protective cover
• The bead breaker arm has the 2 travels to ensure opetation max 15" tyre
• Equiped with sturdy 41mm hexangular shaft and 50mm square shaft, avoids distortion while operation and more suitable for operation the flat and hard tyre
• Specially designed to last long even under unfavourable conditions
• Rim size 10"-26": Good for large size rims

Additional Information:

• Minimum Order Quantity: 1 Unit

Approx. Rs 40,000 / PieceGet Latest Price

We are one of the well-known exporter, manufacturer, wholesaler and trader of Car Washer. The offered car washer is widely used for washing the cars and four wheelers. Our manufactured car washer is made from high-grade raw materials and components. The traded car washer is a very useful tool, for cleaning and washing the cars. Our offered car washer is available at cost effective rates.

Features:

• High pressure cleaning
• Durable
• Longer service life

Additional Information:

• Minimum Order Quantity: 1 Piece

Approx. Rs 7 Lakh / PieceGet Latest Price

Approx. Rs 40,000 / PieceGet Latest Price

• Saving in Time : Just 5-7 mins is required for complete wash
• Saving in Water : Just 120 lts is required for complete wash
• Saving in Electricity : Just 0.5 unit is required for complete wash
• Saving in shampoo : Just 15-20 ml is required for complete wash
• Saving in Manpower : About 4-5 manpower is reduced

Approx. Rs 10 Lakh / PieceGet Latest Price

Approx. Rs 65,000 / PieceGet Latest Price

• 19" Color display, Easy setting
• Digital data setting using "+" "-" keys
• Brief cycle time of 6 secs
• Single spin low RPM balancing technology
• Automatic positioning for weight installation
• Un-balance Optimization: Weight Optimization (reduction)
• Self calibration using master weight
• Self Diagnostic Un-balance optimisation
• Alloy / Mag wheel balancing
• Pedal brake
• Proven design

Approx. Rs 1.2 Lakh / UnitGet Latest Price

Additional Information:

• Minimum Order Quantity: 1 Unit

Approx. Rs 85,000 / PieceGet Latest Price

Approx. Rs 7 Lakh / PieceGet Latest Price

Approx. Rs 5.5 Lakh / SetGet Latest Price

• Hot air generator
• Exhaust unit
• Spray booth

• Proven Design and Economics at many major body shops
• Completely manufactured on latest generation CNC machines using pre-coated sheet metals.
• Reverse Blade Direct Mounted Turbine ensures low electric consumption, consistent airflow reliability; no belts or pulleys requiring maintenance
• The booth is equipped with a Total Air Exhaust Air Handling Unit and when in BAKE position the air circulates inside the generator and a part of this (20%-25% of the total volume) is forced by fan pressure into the booth and is then exhausted out, with consequent replenishment by an equal quantity of fresh air. This kind of circuit allows total air changeover in the booth during the bake cycle
• The circulation inside the generator ensures high level of fuel efficiency
• Full filtered ceiling; simple four element rack ensures fast and easy servicing; self-sealing panels eliminate the need for additional gaskets
• Angled light fixtures provide even distribution of light; eliminating shadows and glare
• Pre-coated sheet metal used inside with 4 surface coatings. Outside sheet metal in with 3 surface coating in galvanised finish
• Fully insulated wall panels; tongue and groove joints for self-centering airtight fit and increased strength
• Front 3 folding door system with large glass windows fitted with new generation locking system and imported anti-panic system

Approx. Rs 50,000 / PieceGet Latest Price

• The machine can perform cleaning testing of all types of top feed and side feed multipoint
• Single point fuel injectors for all types of MPFI vehicles
• The machine can operate either on 230V AC ± 10% or 12 V DC@ 15 Amp battery supply
• Machine will give Alarm at the end of each cleaning testing Operation
• Any Operation can be Hold at any time during cleaning testing
• The machine will depressurize the rail after cleaning testing by Drain key to avoid any wastage of chemical
• Utility Drawer at base for keeping spares

Additional Information:

• Minimum Order Quantity: 1 Piece

Approx. Rs 30,000 / PieceGet Latest Price

Technical features  

• Closed chain drive for power transmission
• Electrical limit switches for stopping at maximum/minimum heights
• Extra safety nuts
• Automatic arms locking and releasing device wile lifting and lowering
• Extender adapter or SUVs
• Chemical injection anchoring bolts (optional)

Technical Specifications:-

Approx. Rs 28,000 / UnitGet Latest Price

• Measurement type: Manual, visual and electronic
• evaluation.
• Positioning/Alignment: Optical wide-range mirror
• (Mirror visor) or Laser visor
• Positioning guide: Electronic assistance (center lens
• laser)
• Back lighted LCD screen
• Electronic measurement
• Digital Lux meter
• Lens type: Plano convex lens
• Analog data values aiming screen read off: Inclination
• (Low beam, fog lights), high beam, break point, yaw
• angle.
• Lateral column movement
• PC data connection/transfer: RS232 serial
• connection, BNET gateway
• Power source: Rechargable batteries, main adaptor
• Column sliding mechanism: Turning knob
• Weight: 30 kg
• Light intensity measured in: Lux
• Number of photodiodes: 8
• Testable types of headlamps: Cut off measurement
• on all types of headlamps.
• Digital data values: Light intensity in Lux, inclination
• (low beam, fog lights).

Additional Information:

• Minimum Order Quantity: 1 Unit

Approx. Rs 95,000 / PieceGet Latest Price

• Display: Touch Screen
• Upgradation via Internet
  
• Working Temperature: -20°C~60°C
• Storage Temperature: -20°C~70°C
• Working Voltage: Powered by vehicle battery, DC 9V-15V

Approx. Rs 35,000 / PieceGet Latest Price

• Low noise level
• Wet dry purpose
• High storage capacity

Specifications:

Approx. Rs 5,000 / UnitGet Latest Price

DG-86 - Timing Lights

Measurement and memory of advance, rpm, dwell in degrees, percentage and milliseconds, direct and peak voltage.

• Three digital displays for measurements on 2 or 4 stroke engines up to 2 sparks per rev, top plug coil and dis systems
• Advance measurement on cars, motorcycles, marine and industrial engines up to 19. 999 rpm
• Stroboscope function for rpm counter of any rotating device
• Cables and rubber shockproof hoods
• Shockproof clamp
• 12V power supply (24v optional)

DG- 83D

• Carries out the above- mentioned measurements
  on single digital display. Remaining features like dg86

Option

• Dt4a adapter for diesel engines

Additional Information:

• Minimum Order Quantity: 1 Unit

Approx. Rs 1.6 Lakh / UnitGet Latest Price

Approx. Rs 1 Lakh / UnitGet Latest Price

Being one of the most trusted names in the industry we are offering Car Hoist of utmost quality.

Uses:

• Used in auto repair shops
• Used in body shops
• Used by car electricians
• Used in service stations
• Used by automobile dealers

Features:

• High efficiency
• Long functional life
• Smooth handling

Specifications:

Additional Information:

• Minimum Order Quantity: 1 Unit

Approx. Rs 15,000 / PieceGet Latest Price

We offer a unique range of Ultrasonic Cleaning Machines that are highly demanded for their excellent performance and low maintenance. With our immense domain expertise, we are involved in offering Cleaning Machine to our valuable clients. This machine is designed using supreme class base component and cutting edge technology at par with international standards. Moreover, we offer this machine in different specifications and can also be customized as per the needs of the clients. In order to deliver flawlessness range, it is tested on various predefined quality parameters.

Specifications:

Approx. Rs 3.5 Lakh / PieceGet Latest Price

Approx. Rs 80,000 / PieceGet Latest Price

• Low maintenance
• Corrosion resistant body
• Efficient performance

• Plungers are of high grade steel manufactured to close tolerance with hard chrome plating for high wear resistance and good finish
• Outer cylinder coated with fiber reinforced plastic protecting it against corrosion (optional)
• Uniquely designed wiper rings prevent entry of water and dust into the hoist cylinder
• Gland rings used in the plungers are designed for enhanced performance
• Heavy duty rigid ramps accommodate a wide range of vehicles of varying size and type

• Capacity (tons): 4
• No. of posts: 1
• Plunger diameter (M): 270
• Operating pressure (kg/cm²): 9 to 12
• Lifting height (mm): 1500
• Ramp length front (mm): 3636
• Ramp width (mm): 700
• Oil fills capacity (ltrs): 150

Additional Information:

• Minimum Order Quantity: 1 Piece

Approx. Rs 16,000 / PieceGet Latest Price

We are an unparalleled name engaged in offering the finest quality range of Spark Plug Cleaner Tester. Designed and developed under the guidance of adroit professionals as per the industry quality standards, offered product is tested on various quality parameters. Further, this product is widely used in various automobile industries and workshops. We offer this product at very affordable rates to the clients.

Features:

• Robust construction

• Longer service life

• Highly efficient

• Easy to operate

Overall Dimensions:

• Length: 350 mm

• Width: 265 mm

• Height: 280 mm

• Over all Weight: 12 kg

Technical Specifications:

• Working Pressure: 5kg / cm-12kg / cm 2

• Spark Plug used: M10, M12, M14 M18

• Input voltage: 220 VAC, 50 Hz

• Electronic Vibrator: 220 V / 12V

• Coil: 12 V / 12 K

Additional Information:

• Minimum Order Quantity: 1 Piece

Approx. Rs 85,000 / PieceGet Latest Price

• Import hydraulic power unit
• Stable lifting movement with the hydraulic power on once piece formed steel post
• Double safely with double locking devices on lifting chain and cable on both posts
• Lifting height 1900 mm, Post distance 2700 mm or 3080 mm

Additional Information:

• Minimum Order Quantity: 1 Piece

Approx. Rs 85,000 / PieceGet Latest Price

• Base plate model
• Designed for low ceiling clearance
• Symmetric arms
• 8 Piece pad adapter set included
• Anchor bolts included

Specification :

1. Capacity: 4000kg
2. Overall Height: 2826mm
3. Overall Floor Width (without motor): 3420mm
4. Max Lift Height (with adapters): 2080mm
5. Min Pad Height: 98mm

Approx. Rs 75,000 / PieceGet Latest Price

Features of Nitrogen Tyre Inflator:

• Suitable for: Car, Light Truck
• Pump the air from the tyre by the internal vacuum generator
• Auto-Start Inflation
• Single Tyre Application
• 72PSI / 5bar / 500 kPa
• Generates nitrogen from your compressed air
• 2 Pre-Filters
• 50L internal nitrogen storage tank
• Remain at last setting
• Audible and visual end of the cycle signal indicators
• LED display
• 1 No. 10m standard hose with single clip-on open tyre chuck

Additional Information:

• Minimum Order Quantity: 1 Piece